Skip to product information
1 of 5

IceCap

IceCap K3-150 HOB Controllable Protein Skimmer

IceCap K3-150 HOB Controllable Protein Skimmer

Regular price $381.19 USD
Regular price Sale price $381.19 USD
Sale Sold out
Shipping calculated at checkout.

Image shown is for reference. Packaging may show a different size or pack quantity. Your order will contain the size or pack quantity stated in this product’s title and description.

Quantity

Out of stock

Special order, available upon request. This item is not kept in stock. Submit a special-order request or contact salesandsupport@n8saltwaterandreef.com to confirm availability, pricing, and lead time before ordering.

The IceCap K3-150 HOB is a Hang-On-Back protein skimmer for marine tanks without a dedicated sump. Its included DCAIR 2.5 DC pinwheel pump mounts externally to the skimmer body, while a digital ten-speed controller allows adjustment of pump output and provides a ten-minute feed pause. A low-profile intake screen draws water into the skimmer, with a separate return assembly routing discharge back to the tank.

Features

  • Included controllable 24 V DC DCAIR 2.5 pinwheel pump.
  • Digital ten-speed controller with wall-mounting clip and ten-minute feed pause.
  • Acrylic rectangular body with PVC fittings and internal bubble-diffusion features.
  • Removable collection cup with 8 mm drain barb.
  • Air intake silencer and silicone airline.
  • Low-profile intake screen and return plumbing.
  • Hang-On-Back installation with no sump required.

What's Included

  • K3-150HOB acrylic external skimmer body.
  • Removable collection cup with 8 mm drain barb.
  • Controllable DCAIR 2.5 DC needlewheel skimmer pump.
  • Digital ten-speed controller with wall-mounting clip.
  • Air intake silencer and silicone airline.
  • Clear collection-cup drain hose, 8 mm inside diameter × 12 mm outside diameter.
  • Low-profile intake screen and return plumbing assembly.
  • Rim-clamping hardware.

Specifications and Fit

  • Application: External Hang-On-Back marine tank use.
  • Listed body footprint: 10 × 3.5 inches.
  • Listed total height: 25 inches.
  • Maximum listed tank-rim mounting width: 1.57 inches / 40 mm.
  • Pump: DCAIR 2.5 DC pinwheel.
  • Listed pump operating voltage: 24 V DC.
  • Maximum listed power consumption: 16 W.
  • Listed air draw: 900 L/h / 31.5 SCFH.
  • Approximate listed water throughput: 317 GPH.

Air and water results vary with setup. Confirm rim shape and compatibility, operating water level, clearance for the external pump and plumbing, and access for collection-cup removal before purchase. The 3.5-inch body depth is not a confirmed total installed rear-clearance requirement.

Installation and Adjustment

  1. Follow the manufacturer's model-specific setup diagram. Inspect and seat the pump-union O-rings before assembly.
  2. Align and hand-tighten pump unions as directed. Do not use metal wrenches on acrylic fittings.
  3. Connect the silicone airline and air silencer according to the manual.
  4. Hang securely on a compatible tank rim and level the body using the supplied stabilization adjustments.
  5. Prime the skimmer with tank water before applying power. Follow the manual for the correct fill level and startup procedure; do not run the pump dry.
  6. Connect the pump, controller, and power adapter as directed. Use a GFCI-protected outlet and keep electrical equipment dry.
  7. Follow the manual for priming controls, initial speed, and break-in operation. Monitor closely and make gradual adjustments, allowing time for the foam line to respond.

Manufacturer K3-100/150 HOB user instructions

Care and Collection-Cup Drain

Disconnect power before servicing. Clean the collection cup and inspect the intake, return path, airline, and pump for deposits or obstructions according to the manufacturer's manual. Follow the manual's directions for routing or closing the cup drain.

A collection-cup drain is not fail-safe overflow protection. If using an external waste collector, secure and monitor the hose and container, and empty it before it fills. An external collector can overflow and does not eliminate the risk of water reaching the floor.

Limited Warranty and Store Support

The supplied CoralVue limited warranty provides one year of coverage against defects in materials and workmanship, beginning on the purchase date.

Coverage is limited to the original purchaser and excludes accident, misuse, abuse, modification, alteration, defacement, and unauthorized repair or attempted repair. The supplied terms require written notification to CoralVue within 10 days of discovering a defect and an opportunity to repair, replace, or correct the defect within a reasonable period. The supplied terms exclude special, indirect, secondary, or consequential damages. Refer to the complete warranty supplied with the product.

All support and warranty requests are handled through N8 Saltwater & Reef. Contact salesandsupport@n8saltwaterandreef.com promptly so we can coordinate your request. Store handling does not extend manufacturer coverage.

View full details