Flipper
Flipper MAX Float 2-in-1 Magnetic Tank Cleaner
Flipper MAX Float 2-in-1 Magnetic Tank Cleaner
Image shown is for reference. Packaging may show a different size or pack quantity. Your order will contain the size or pack quantity stated in this product’s title and description.
Low stock: 1 left
Couldn't load pickup availability
Two Cleaning Faces for Larger Tanks
The Flipper MAX Float combines a cleaning pad and scraper in one floating inner assembly. Switch from routine film wiping to scraping attached algae by rotating the external handle, without reaching into the tank. Its larger, contoured grip provides a comfortable handhold during maintenance.
Compatibility
Designed for tank panels ⅝–1 inch thick. Check your panel thickness before choosing this cleaner; the MAX has a different thickness range from the Standard Float.
- Glass tanks: Use the included stainless steel blade.
- Acrylic tanks: Use the included ABS plastic blade only. Never use the stainless steel blade on acrylic.
- Intended for freshwater and marine tank maintenance.
Key features
- Scrub and scrape: Dual-sided inner assembly combines a polishing pad and scraper.
- Flip-action design: Rotate the outside handle to switch cleaning faces in an open area with room for the inner assembly to turn.
- Floating wet assembly: Designed to rise toward the surface if the magnetic connection separates.
- Contoured external handle: An enlarged grip provides a substantial handhold.
- Sealed neodymium magnets: Couple the inner cleaning assembly to the outside handle across the supported panel range.
- 3 mm blade-side clearance: Provides space behind the scraping edge, but does not eliminate trapped debris or scratching risks.
Technical specifications
- Model: Flipper MAX Float Magnet Cleaner
- Supported panel thickness: ⅝–1 inch
- External handle dimensions: 5.125 × 2.5 × 1.5 inches (L × W × H)
- Internal assembly dimensions: 6.5 × 3.375 × 0.5 inches (L × W × H)
- Blade-side clearance: 3 mm
- Magnets: Sealed neodymium rare earth magnets
- Glass blade: 316 stainless steel
- Acrylic blade: ABS plastic
What's included
- 1 Flipper MAX Float external dry-grip handle
- 1 Flipper MAX Float floating internal cleaning assembly
- 1 stainless steel scraping blade, for glass only
- 1 ABS plastic scraping blade, for acrylic only
Setup and use
- Inspect the pad and blade for debris or damage. Select the correct blade for your tank-panel material.
- Fit the blade securely into the wet assembly's mounting points according to the supplied product instructions.
- Place the inner assembly in the water near an upper corner. Carefully bring the external handle toward the outside panel to engage the magnets, keeping fingers clear of the two halves.
- Use gentle cleaning passes. To change faces, move to a low-current, unobstructed area roughly 3 inches below the waterline with clearance from rockwork and corals. Follow the supplied flip instructions, rotating the outside handle 180 degrees and bringing it back gently rather than snapping it against the panel.
- Keep clear of sand and gravel. Inspect the cleaning surfaces regularly and stop immediately if debris becomes trapped.
- Inspect blades for wear and replace as needed. The supplied guidance suggests replacement around every 3–6 months depending on use and algae load.
Care and precautions
- Strong magnets can pinch fingers. Keep fingers clear and do not allow the halves to snap together.
- Never use the stainless steel blade on acrylic.
- Neither the clearance gap nor the plastic blade guarantees scratch-free cleaning. Sand, grit, or damaged cleaning surfaces can scratch panels.
- Allow adequate space for the inner assembly to turn without contacting livestock or rockwork.
- Follow the supplied manufacturer guidance for cleaning and storage; do not assume continuous in-tank storage is suitable in every situation.
- Replacement blades are sold separately. Select replacements explicitly compatible with the MAX model.
Manufacturer warranty
The following warranty terms are supplied by CoralVue, Inc.:
CoralVue, Inc. hereby guarantees this product to be free from defects in material and workmanship for a period of:
1 Year
Warranty is activated on the date of purchase.
This Standard Limited Warranty applies and is limited as follows:
- To the product only as long as it remains in the possession of the original purchaser.
- To the product that has not been subject to accident, misuse or abuse.
- To the product that has not been modified, altered, defaced, or had repairs made or attempted by other than CoralVue, Inc.
- That CoralVue be immediately notified in writing within ten (10) days of first knowledge of defect by owner or his agent.
- That CoralVue, Inc. shall be given first opportunity to make any repairs, replacements or corrections to the defective construction within a reasonable period of time.
Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warranty or otherwise for damage to any person or property whatsoever for any special, indirect, secondary or consequential damages of any nature however arising out of the use or inability to use because of the product defect.
Share




